 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PAA190 Dual Single Pole OptoMOS(R) Relays Blocking Voltage Load Current Max RON PAA190 400 150 22 Units V mA Features * 5000VRMS Input/Output Isolation * Small 8 Pin DIP Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Surface Mount and Tape & Reel Versions Available Description PAA190 is a dual 400V, 150mA, 22 1-Form-A solid state relay. This performance leader provides high blocking voltage handling capability and improved peak load current handling, and an enhanced 5000V isolation barrier between the input and output circuits of the relay. Approvals * UL Recognized: File Number E76270 * CSA Certified: File Number LR 43639-10 * Complies with: * EN 60950 * IEZC 950 * AS/NZ 3260 * EN 41003 Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hookswitch * Dial Pulsing * Ground Start * Ringing Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment-Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Ordering Information Part # PAA190 PAA190S PAA190STR Description 8 Pin DIP (50/Tube) 8 Pin Surface Mount (50/Tube) 8 Pin Surface Mount (1000/Reel) Pin Configuration PAA190 Pinout AC/DC Configuration + Control - Switch #1 - Control - Switch #1 + Control - Switch #2 - Control - Switch #2 1 2 3 4 8 7 6 5 Load - Switch #1 Load - Switch #1 Load - Switch #2 Load - Switch #2 Switching Characteristics of Normally Open (Form A) Devices 10ms CONTROL LOAD 10%+ +90% TON 10%+ TOFF DS-PAA190-R02.0 www.clare.com 1 PAA190 Absolute Maximum Ratings (@ 25 C) Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Blocking Voltage Total Power Dissipation Isolation Voltage Input to Output (60 seconds) Operational Temperature Storage Temperature Soldering Temperature 1 2 Min -40 -40 - Typ Max Units 1501 50 1 5 400 8002 mW mA A V V mW Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. 5000 VRMS +85 +125 +260 C C C Derate Linearly 1.33 mw/C Derate Linearly 6.67 mw/C Electrical Characteristics Parameter Output Characteristics @ 25C Load Current* (Continuous) AC/DC Configuration Peak Load Current On-Resistance AC/DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current Input to Output Capacitance IL=150mA IF=5mA VR=5V IF IF VF VR IR CI/O 5 0.2 0.9 0.7 1.2 3 50 1.4 5 10 mA mA V V A pF 10ms IL=150mA VL=400V IF=5mA, VL=10V IF=5mA, VL=10V 50V; f=1MHz IL ILPK RON ILEAK TON TOFF COUT 25 150 400 22 1 1 0.5 mA mA A ms ms pF Conditions Symbol Min Typ Max Units *NOTE: If both poles operate simultaneously load current must be derated so as not to exceed the package power dissipation value. 2 www.clare.com R02.0 PAA190 PERFORMANCE DATA* 35 30 Device Count (N) PAA190 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25C) IF = 5mADC 35 30 Device Count (N) PAA190 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25C) (Load Current = 150mADC; IF = 5mADC) PAA190 Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25C) 35 30 Device Count (N) 25 20 15 10 5 0 25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) 25 20 15 10 5 0 13.1 13.7 14.3 14.9 15.5 16.1 On-Resistance () 441.5 450.5 459.5 468.5 477.5 486.5 Blocking Voltage (V) PAA190 Typical IF for Switch Operation (N=50 Ambient Temperature = 25C) (Load Current = 150mADC) 25 Device Count (N) 20 15 10 5 0 0.75 1.05 1.35 1.65 1.95 2.25 LED Current (mA) PAA190 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25C) 25 20 15 10 5 0 0.75 1.05 1.35 1.65 1.95 2.25 LED Current (mA) 25 20 15 10 PAA190 Typical Turn-On Time (N=50 Ambient Temperature = 25C) (Load Current = 150mADC; IF = 5mADC) Device Count (N) Device Count (N) 5 0 0.15 0.21 0.27 0.33 0.39 0.45 Turn-On (ms) PAA190 Typical Turn-Off Time (N=50 Ambient Temperature = 25C) (Load Current = 150mADC; IF = 5mADC) 25 20 15 10 5 0 0.05 0.07 0.09 0.11 0.13 0.15 Turn-Off (ms) Load Current (mA) PAA190 Typical Load Current vs. Temperature 300 250 200 150 100 50 0 -40 -20 0 20 40 60 80 100 120 Temperature (C) Leakage (A) 0.035 0.030 0.025 0.020 0.015 0.010 0.005 0 -40 PAA190 Typical Leakage vs. Temperature (Measured across Pins 4 & 6) Device Count (N) IF =10mA IF =5mA -20 0 20 40 60 80 100 Temperature (C) PAA190 Typical Blocking Voltage vs. Temperature 480 Blocking Voltage (VRMS) 475 Turn-On (ms) 470 465 460 455 450 -40 -20 0 20 40 60 80 100 Temperature (C) 1.50 1.25 1.00 0.75 0.50 0.25 0 -40 PAA190 Typical Turn-On vs. Temperature (Load Current = 150mADC) 0.140 0.120 Turn-Off (ms) 0.100 0.080 0.060 0.040 0.020 -20 0 20 40 60 80 100 0 -40 PAA190 Typical Turn-Off vs. Temperature (Load Current = 150mADC) 5mA 10mA -20 0 20 40 60 80 100 Temperature (C) Temperature (C) * The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R02.0 www.clare.com 3 PAA190 PERFORMANCE DATA* PAA190 Typical LED Forward Voltage Drop vs. Temperature LED Forward Voltage Drop(V) 1.8 1.6 Turn-On (ms) 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 80 100 120 Temperature (C) PAA190 Typical Turn-On vs. LED Forward Current (Load Current = 150mADC) 0.40 0.35 0.30 Turn-Off (ms) 0 5 10 15 20 25 30 35 40 45 50 0.25 0.20 0.15 0.10 0.05 0 PAA190 Typical Turn-Off vs. LED Forward Current (Load Current = 150mADC) 0.12 0.10 0.08 0.06 0.04 0.02 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) 50mA 10mA 5mA LED Forward Current (mA) 25 On-Resistance () 20 15 10 PAA190 Typical On-Resistance vs. Temperature (Load Current = 150mADC; IF = 5mADC) LED Current (mA) PAA190 Typical IF for Switch Operation vs. Temperature (Load Current = 150mADC) 3.000 2.500 LED Current (mA) 2.000 1.500 1.000 0.500 0 -40 -20 0 20 40 60 80 100 3.000 2.500 2.000 1.500 1.000 0.500 0 -40 PAA190 Typical IF for Switch Dropout vs. Temperature (Load Current = 150mA) 5 0 -40 -20 0 20 40 60 80 100 Temperature (C) -20 0 20 40 60 80 100 Temperature (C) Temperature (C) 150 Load Current (mA) 100 50 0 -50 -100 PAA190 Typical Load Current vs. Load Voltage (Ambient Temperature = 25C) IF = 5mADC PAA190 Energy Rating Curve 1.2 1.0 Load Current (A) 0.8 0.6 0.4 0.2 0 10s 100s 1ms 10ms 100ms Time 1s 10s 100s -150 -2.5 -2.0 -1.5 -1.0 -0.5 0 0.5 1.0 1.5 2.0 2.5 Load Voltage (V) * The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R02.0 PAA190 MECHANICAL DIMENSIONS 8 Pin DIP Through Hole (Standard) 9.652 0.381 (0.380 0.015) 7.620 0.254 (0.300 0.010) 3.302 7.239 TYP. (0.285 TYP.) (0.130) 6.350 0.127 (0.250 0.005) 9.144 TYP. (0.360 TYP.) 0.457 0.076 (0.018 0.003) 8.077 0.127 (0.318 0.005 ) 9.144 0.508 (0.360 0.020) 2.540 0.127 (0.100 0.005) PC Board Pattern (Top View) (8-0.031 DIA.) 2.540 0.127 8-0.800 DIA. (0.100 0.005) 6.350 0.127 (0.250 0.005) 7.620 0.127 (0.300 0.005) 7.620 0.127 (0.300 0.005) 8 Pin DIP Surface Mount ("S" Suffix) 2.540 0.127 7.620 0.254 (0.300 0.010) 4.445 0.127 (0.175 0.005) 3.302 (0.130) (0.100 0.005) 9.652 0.381 (0.380 0.015) PC Board Pattern (Top View) 2.540 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) 9.525 0.254 (0.375 0.010) 1.905 0.127 (0.075 0.005) 8.305 0.127 (0.327 0.005) 0.635 TYP. (0.025 TYP.) 0.254 TYP. (0.010 TYP.) 0.457 0.076 (0.018 0.003) 1.498 0.127 (0.059 0.005) 8.077 0.127 (0.318 0.005) Dimensions mm (inches) R02.0 www.clare.com 5 MECHANICAL DIMENSIONS Tape and Reel Packaging for 8 Pin Surface Mount Package 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) 1 8 W = 16.30 max (0.642 max) Bo = 10.30 (0.406) Top Cover Tape Embossed Carrier P = 12.00 (0.472) Ao = 10.30 (0.406) K = 4.2 Embossment (0.165) K = 4.90 0 1 User Direction of Feed (0.193) NOTE: Tape dimensions not shown, comply with JEDEC Standard EIA-481-2 Dimensions mm (inches) For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-PAA190-R02.0 (c)Copyright 2003, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 6/18/03 |
Price & Availability of PAA190S
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |